Kenwood DNX5280BT Manual do Utilizador descarregar pdf (Página 26)

Quick Start Guide

Microphone unit

1) Check the installation position of

the microphone (accessory 9).

2) Remove oil and other dirt from

the installation surface.

3) Install the microphone.

4) Wire the microphone cable up to

the unit with it secured at several

positions using tape or other

desired method.

Fix a cable with a commercial item of tape.

Peel the release coated paper of

double-face adhesive tape to fix on

the place shown above.

Adjust the direction of the

microphone to the driver.

NOTE

• Install the microphone as far as possible

from the cell-phone.

Removing Procedure

Removing the hard rubber

frame (escutcheon)

1) Engage the catch pins on the

removal tool (accessory 4) and

remove the two locks on the

lower level.

Lower the frame and pull it

forward as shown in the figure.

Lock

Catch

NOTE

• The frame can be removed from the top

side in the same manner.

2) When the lower level is removed,

remove the upper two locations.

B59-2048-00_00_DNX7_E_en.indd 26 10/12/16 12:11

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Sem comentários

Models	Document Type
90551961	User Manual Vector 90551961 User Manual, 21 pages
VEC270MG	User Manual Vector VEC270MG User Manual, 16 pages

Kenwood DNX5280BT Manual do Utilizador Página 26